 |
 |
 |
 |
 |
 |
 |
 |
 |
| Thread Gages By ALEMEDA ( a division of Deltronic) | |
 |
Thread Gages Delivering Quality Thread Gages Since 1955 Over 4,000 inch/metric sizes of both Plugs and Rings in stock, standards and specials, from Micro-Miniatures to 3" diameter |
| SAME DAY DELIVERY FROM STOCK! Call by 4pm Pacific and we'll ship same day. You'll have your gages by 8:30 am NEXT DAY! (via optional UPS Red Label) We Also Offer Prompt Shipment On Specials. Special Thread Plug Gages In Stock For Same Day Delivery The following is an example of our in-depth inventory of special thread plug gages. We are continuously expanding our range of sizes. Call your local stocking Alameda distributor or call us directly at the factory. The special gages you need are more than likely in stock for same-day-shipment. |
|
|
|
| SPECIFICATIONS Certification guaranteeing Class X accuracy and Traceability to the National Bureau of Standards is included in all Alameda thread plug gages. The actual Calibrated Pitch Diameter is also supplied with each gage at NO EXTRA CHARGE. Tolerance conforms to H-28 Federal Screw Thread Standards for Class X gages in every respect. QUANTITY DISCOUNTS AVAILABLE ON ASSORTED SIZES |
|
|
|
|
|
THREAD PLUG GAGES AGD Reversible & Taperlock styles Unified Thread Series (UNC-UNF-UNEF) Standard (ANSI B1.2) "X" Tolerance, Class 2B or 3B Tolerance conforms to ANSI Federal Screw Thread Standards for Class X gages in every respect. |
| THREAD RING GAGES, TRUCATED SET PLUGS AGD Style Taperlock Set plugs are Class W tolerance on lead, flank angles, straightness and X tolerance on pitch diameter. METRIC THREAD PLUG GAGES 6H TOLERANCE Alameda manufactures metric gages to ANSI standard B1/16. They equal or exceed requirements of ISO-1502 in every respect. |
|
|
|
|
 METRIC THREAD, RING GAGES AND METRIC SET PLUG GAGESAlameda manufactures at 6g Tolerance. WIRE COIL INSERT THREAD PLUG GAGES Members are taperlock style, class 2B or 3B, either Go or No Go. PIPE THREAD GAGES Pipe Thread Plug Gages, NPTF, ANPT and NPT Pipe Thread Ring Gages, NPTF and ANPT |
|
| THREAD MEASURING WIRES INCH AND METRIC Conform to Thread Wire Standards Deltronic Thread Wires are certifies to meet or exceed requirements of the ANSI/ASME B1.2 thread standard and ANSI/ASME B1.16M Standards. Tolerance Commonly three wires within each set are within five millionths (.000,005"), .00013mm. of calibrated size; Set diameter is plus or minus 20 millionths (.000,020") .0005mm of "best" wire size and calibrated to the nearest 10 millionths (.000,010"), .00025mm of exact size: Roundness is within 10 millionths (.000,010") .00025mm; Surface Finish is better than 2 microinches AA, lapped; Hardness, Rc 62-64 stabilized; Straightness of the central 1/2" of the wire's length is within 10 millionths (.000,010"), .00025mm maximum deviation. Thread wires are manufactured by our parent company, Deltronic. Wire Set Packaging Each set of three wires is contained in a screw-top vial. The vial is packaged in a hinged-lid box which is labeled to show pitch and calibrated wire size. The calibrated wire size is also shown on the Certificate of Accuracy contained in each set box. Acme Wires Best Wire Sizes are in stock for 29 degree Acme Thread Checking. Certification and tolerances match those of Deltronic's standard 60 degree thread wires. These three wire sets are packaged in the vials within labeled boxes the same as all other Deltronic thread and gear wires. Request more information |
|
|
|
|
|
DELTRONIC
QUALITY MEASUREMENT SINCE 1955 3900 West Segerstrom Avenue Santa Ana, California 92704 Tel: 800-451-6922 Fax: 800-969-3358 Contact Deltronic To contact Webmaster: webmaster@deltronic.com © 2002 DELTRONIC All Rights Reserved |
|
|